1. Stainless steel conveyor belt;
2. Sandwich PUF panels 150mm thick, laminated by stainless steel sheet both sides; floor panels are equipped;
3. Doors are equipped with frame heating device;
4. Aluminum evaporators, different fin pitches;
5. Axial fans: stainless steel air box, aluminum blades;
6. Full welded stainless steel water discharging plate is installed on top of floor panels. It will bring defrosting water out of cabinet through stainless steel draining pipes;
7. The inlet device, outlet device and all structure parts are made of stainless steel;
8. Control panel is made of stainless steel;
9. Schneider or Siemens electric components;
10. SEW speed reducer.
|BASIC PARAMETERS OF SCHEME DESIGN
|Frozen product name
||Shrimp, Mussel Meat, Scallop Meat, Squid Strips
|Frozen product size/single weight
||No device freezing (naked freezing)
|Frozen product feed temperature/℃
|Frozen product discharge temperature/℃
|Single product freezing time
||10-40min (speed adjustable)
|Nominal freezing capacity KG/h
|EQUIPMENT DESIGN BASIC PARAMETERS
||Down blow type
||Air supply form
||Down and out the back air flow
||Dimensions (length*width*height mm)
||Main cold room length mm
||Mesh belt width
||Mesh belt form
||316 Stainless Steel
||Feed port length
||Panel material density
||Double-sided stainless steel polyurethane board * 0.5 mm
||Energy saving measures
||Equipped with air blocking plate and inlet and outlet material wind shield device
||Fan frequency modulation
||The motor can be adjusted according to the demand of the goods
|PARTS CONFIGURATION TABLE
||90+125 HP Fujihao Screw Evaporative Cooling Unit
||Customized high-efficiency air cooler, 304 stainless steel air duct, die-cast aluminum impeller, motor protection grade IP55
||PLC control electric box + remote monitoring
||Combination of stainless steel sheet metal and stainless steel square tube, fast and corrosion-resistant
||Front and rear hubs, brackets, scrapers all 304 stainless
1). Installing by the user: we will tested and install well the machine before shipment, all necessary spare parts, operation
manual and CD are provided to guide the installation.
2).Installing by our engineers:
(1) We can send our engineer to assist the installation and provide technical support and train your workers. The end-user provide accommodation and round-trip ticket for our engineer.
(2) Before our engineer arrived in your site, the installation place, electricity, water and installation tools should be ready.
Meanwhile, we will provide you a Tool List with the machine when delivery.
(3) All spare parts are provided according to our standard. During installation period, any shortage of parts due to the actual
installation site, the buyer is required to afford the cost, such as water pipes.
(4) 2~ 3 workers are required to assist the installation for big project.
Guarantee Period: During 12 months after selling, maintenance and parts free of charge
Hot Tags: blast chiller tunnel cold storage refrigeration equipment for aquatic goods, China, manufacturer, factory, price, buy