CBFI 120 tons Block Ice Machine project installed in Zhengzhou city, China
November 21, 2016
The first thing is to check the material when we arrived in Zhengzhou 120 tons block ice machine scene, and then recommend that the customer to prepare the material. The second thing is our technical staff have investigated scene.
The first stage: the production of four brine tank.
Ice tank scene
1.The left side is the 50kg ice moulds brine tank location, the right side is the 100kg ice moulds brine tank location.
This area is for melting ice and ice pouring.
November 27, 2016
Starting work after the workers arrived in here with materials, the first, laying 100kg ice moulds brine tank bottom steel plate and making spot-welding.
Preparation for the Vertical steel of brine tank.
The first tank is formed
The second tank is formed
Preparation for vertical steel of brine tank
December 9, 2016
The second stage: ice machine unit, evaporator, etc. to reach the designated location.
Discharge of main machine and coil pipe evaporator.
condensing unit install in the machine room
evaporator install outside
December 10, 2016
The third stage: welding and strengthen steel plate of the brine tank, production of the melting ice tank, agitator and ice shelf.
Production of melting ice tank
Polish and fill the weld gap
Painting seamless steel pipes and surface rust remove
ice mould shelf
shelf install inside tank
December 30, 2016
The fourth stage:
1.the ice shelf painting;
Cleaning the brine tank and testing water (test leakage), from the first brine tank to the fourth brine tank, one by one filled with water to observe, then after testing no leakage, then put water drained away, and then get rid of the steel surface of the rust and painting after the brine tank dry
Cleaning the brine tank and testing the water (test leakage) and painting
Brine tank filled with water for leak detection
draining the water, waiting water dry of brine tank
ice mould finished weld on shelf
coil ecaporator finished installation.
more pictures will update after finish the whole project .
Contact Person: Mr. Henry Lin
Tel: 86-180 2621 9032