Recently, the demand of ice blocks machine is very large. To reduce costs, some customers buy brine type ice block machine. And more conviently, such as automatic model, the CBFI brand direct cooling block ice machine is the better choose for you!
However, When using the ice block machine, it is necessary to understand some operation knowledge. For example, the point that needs to be paid attention to is the heat dissipation problem. Because some heat will be generated during the manufacture of the ice block, it needs to be dissipated. Otherwise, the location will put a burden on the equipment and will also affect the power of the ice blocks. Therefore, we must pay attention to certain details. Specifically, the matters needing attention in the use of the CBFI ice block machine also include the following aspects.
1、pay attention to placing in a suitable environment
Before these applications, the ice blocks machine should be installed in a clean, clean and well-ventilated environment indoors. It cannot be placed in the open air to prevent it from being exposed to wind, rain and sun, otherwise it is very risky and simple aging. In addition, the ice block machine manufacturer must lay it on the ground so that it can run smoothly during the operation to prevent noise or risk. At the same time, it should be noted that there must be a certain space around to allow more Good heat dissipation.
2、pay attention to be satisfied with its operating conditions
The ice block machine should be supplied with its regular independent power supply and the method of ensuring that the power supply is grounded. This is a basic requirement to ensure the normal operation of the machine, and it must be equipped with fuses and leakage maintenance switches together with voltage fluctuations. Can not exceed the scale of the rule in order to ensure the safety of the application. The water source used by an ice block machine should meet the drinking water specifications, and it can only be officially used after being filtered.
3、Pay attention to the regular cleaning work
In order to ensure the normal operation of the ice block machine, the water valve filter should be cleaned every two months to prevent clogging, and although the ice block machine will drain the water in the sink to reach the cleaning after each use However, it is not enough to do so. It is necessary to perform thorough cleaning and disinfection at least once every six months. If it is not used for a long time, it should be cleaned before it can be reused. Moreover, the ice block machine manufacturer also reminds to keep the interior dry after washing, and can use a hair dryer to dry it.
The above are the aspects included in the attention of the operation of the ice block machine. In addition, it must be very shockproof during transportation. If it is a long-distance transportation, you can put some foam in it and fix it on the car to prevent it from shaking. The direct cooling type ice blocks machine manufacturer introduced that after the transportation is completed, it should be noted that it cannot be used immediately, and it should be allowed to stand on a flat ground.
About Ice blocks machine manufacturer, you could choose CBFI® China Top Ice Machines Manufacturer. Daily Capacity: 1-100 Tons. It is widely used in docks, ice-making plants for food processing and preservation, aquatic product preservation, cooling, ice sculpture shaping, edible ice manufacturing.