In the chemical industry, there is a large demand for the amount of ice used to cool down the reactor
Tens of tons of ice are often needed to meet the cooling needs of daily production
How is so much ice delivered to the reactor?
Three Pain Points in Ice Transportation in the Chemical Industry
1. Ice cubes are easy to melt during transportation—affecting later chemical reactions
2. Long and complex ice delivery distance—the chemical production workshop is large, and the chemical equipment is large and numerous
3. High requirements on the cleanliness of ice cubes
CBFI Refrigeration's air-conveyed ice delivery system specially designed for the chemical industry perfectly solves the pain points of ice delivery in the above three industries.
What is a wind delivery system?
CBFI Shandong rake type automatic ice storage project - air delivery system
Air conveying system, also known as air conveying, uses the energy of air flow to transport granular materials along the direction of air flow in a closed pipeline, which is a specific application of fluidization technology.
How does Bingquan solve the pain points?
1. Pipeline airtight design
Through the airflow instead of manual transportation, the cleanliness and hygiene of the ice cubes are guaranteed during the transmission process;
2. Soft PE material
The pipe is made of PE material, which can be flexibly twisted and installed without taking up space, and the cost of modification is low if necessary;
3 Air pre-cooling unit temperature control
The air supply temperature of this device is 5-10 ℃ to ensure that the ice will not melt;
4. Buffer freezer
Prevent the impact force brought by the impact force during the transportation process, reduce a large amount of wind entering the reactor, and connect the exhaust pipe at the upper end to deal with odors intensively;
5.3D big bend design
The 3D large bend design at the pipe connection avoids blockage of flake ice caused by the use of 90° elbows at the connection, and will not affect the ice delivery efficiency due to too much resistance;
What other detailed designs does CBFI have?
1. Aluminum foil wrapping
PE pipes are wrapped with aluminum foil for heat preservation to ensure the workshop is beautiful and tidy;
2. Disposal and environmental protection treatment
When the ice cubes fall into the reactor, part of the exhaust gas will be discharged, and this part of the exhaust gas will be treated together with the exhaust gas of the reactor and then discharged;
3. Early design of drainage treatment
The installation area of the ice delivery system shall be designed in advance for drainage treatment;
Contact Person: Mr. Henry Lin
Tel: 86-180 2621 9032