|Ice Thickness:||1mm-2mm||PLC:||Germany Siemens|
|Ice Temprature:||-5℃||Capacity:||0.5 Ton To 60 Tons|
|Voltage:||110 V To 460 V||Phase:||1 Phase And 3 Phase|
Flake Ice Maker,
Flake Ice Making Machine
Flake ice machine
1. The temperature of ice is lower and it can reach 8 Celsius degree below zero
2. Ice is dry and transparent, good looking shape, non-caked, good mobility and sanitary.
3. It has the flake shape so that it has big contact area with refrigerating products and the effect is excellent.
4. Flake shape and no sharp edges, cannot destroy refrigerating products and it is beneficial for storage and transportation.
5. The thickness of flake ice is 1mm-2mm. No need to crush and can use at any time.
This is BF500 , prudunction is 500kg per day
Flake ice is widely appiled to supermarket fresh-keeping,fisheries production, aquatic pruducts processing ,
fruits and vegetables primary processing and fresh-keeping , meat productprocessing medical,chemical and many other fields.
Our ice flake machine realized the micro -computer centralized control,so easy to operate.
Flake Ice is used for fisheries
Flake Ice Machine of the container The electric box and screen controled by PLC
The flake ice machine of the produnction of 15tons per day with cooling tower.
The cooling tower
1.The above information is according to adopt water cooled condenser.
Size of machine is before installation.
2. It didn't mention size of cooling tower, cooling tower usually install in the outside.
3. Machine running condition: water temperature: 23Centi degrees, evaporate temperature: -23Centi degrees,
condensing temperature 40Centi degrees, reference valve under 50Hz power supply. Real production of machine will
have a little change according to change of water temperature and ambient temperature.
Before leaving the factory machines will be test and operation 15 tons
1. Reliable Operation - Works constantly and safely under the control of PLC system and also the auto-protections that
against supply water shortage, high/low pressure, electric current overload, etc.
2. Fast Cooling - CBFI ice machine has large contace area, the evaporating temperature is lower than -2C.
3. Saving Cost & Labor - CBFI ice machine requires less mechanical and human labors than block ice, and CBFI flake ice production does not require a defrost cycle.
4. Easier Storage & Distribution - Our flake ice is completely dry without free water, it will not rapidly fuse together in a storage bin or clog screw conveyors.
5. Saving Water -CBFI flake ice machine recycles all unfrozen water back to the ice machine, so no water is wasted.
6. Easy installation - Users just need to connect water pipes and electricity. Meanwhile, the necessary part s and spared parts are offered together free of charge.
Our factory can prduce lots of flake ice machine,welcome to contact us.
We provide famous accessories of flake ice machine
Standard wooden case we provide 20GP or 40GP container
1. Standard wooden case.
2. Completely ice machine contain: machine, cover,cooling tower, water pump, water pipes and water pipe fittings.
3. Machine come into use, customer only need prepare power for the machine.
4. All required components for installing the machine will be provided.
5. Our factory also can produce cold room for store ice.
If you are interested in our products, please contact us. We would be very glad to be on service for you.
As the most professional ice machine manufacture in China, we are pleased to do our best offer to open a good market for you.
We are definitely to contact you within 24 hours after getting your inquiry.
GungZhou Icesource Refeigeration Equipment Co.,LTD is founded in 2004.
Our factory was located in Panyu District of guangzhou,Guangdong province.It is convenient for load
and transport goods and for customers come to visit our factory.
We sell large large ice cube machine,ice block machine,ice tube machine,cold room,ice plate,shaved ice machine and so on.
Icesource products have passed ISO9001,ISO14001,and CE certificate.
There are two company on oversea ,one is in Nigeria ,the other one is in Malaysia.
1. The payment can be T/T,L/C,Western Union, Money Gram and in Cash.
2. The deposit is 30%, after we receive your deposit, we will start to produce the machine for you.
The balance 70% should be paid before shipping.
3. The delivery time normally is 30 days after receive the deposit.
4. If necessary, we will arrange the shipping for you.
Contact Person: Henry Lin
Tel: 86-180 2621 9032