|Place of Origin:||Guangzhou, China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Standard wooden case for the flake ice machine|
|Delivery Time:||30 work days|
|Payment Terms:||T/T, Western Union, MoneyGram, L/C|
|Supply Ability:||30 sets per month|
|Flake Ice Capacity:||5 Tons||Cooling Style:||Water Cooling|
|Cooling Method:||Direct Cooling||Ice Shape:||Flake Ice|
|Application Fields:||Concrete Mixing||Condition:||New|
|Usage:||For Refrigerate||Application:||Fishery Harbor Ice Factory|
Seawater Flake Ice Machine,
Flake Ice Machine Seafood Processing
5Tons Seawater Flake Ice Making Machine for Seafood Processing
Flake ice is a kind of ice machine, the thickness is about 2mm irregular ice chip shape, ice can be turned on for 5 minutes can last 24 hours off the ice and not easy to melt. Therefore, it is very convenient and can be used directly in various fields. It is common to spread ice on the seafood ice table in the supermarket, which can keep the food fresh for a long time and refrigerate at low temperature.
Ice Flake Machine Ice Principle
Ice blades, sprinkling disk, main shaft, water plate in the drive of the reducer, counterclockwise slow rotation. Water from the ice machine evaporator inlet into the water distribution tray, through the sprinkling pipe, the water evenly sprinkled on the icing surface, forming a water film; The water film exchanges heat with the refrigerant in the refrigerant flow path, and the temperature decreases rapidly, forming a thin layer of ice on the icing surface. Under the extrusion of the ice blade, it breaks into pieces of ice and falls into the ice house from the ice fall mouth. Part of the uniced water flows back from the water outlet to the cold water tank through the water tray, and then circulates through the cold water circulation pump.
Characteristics of Flake Ice Machine Equipment
Internal scraping ice knife, reduce energy consumption, prevent refrigerant leakage - stainless steel materials, advanced processing equipment and heat treatment, ensure the best heat transfer efficiency - large area of the water plate design, prevent the evaporator bottom drip - evaporator bottom directly installed photoelectric switch, no need to install in the ice storage - direct liquid supply, dry evaporation, simple and safe control - integral, modular equipment, Convenient on-site installation and maintenance.
Flake Ice Making Machine Application:
Aquatic food processing
Dye chemical industry
Temp. Reduction of Mine
Concrete construction project
Flake Ice Machine Parameters
|Flake Ice Machine Parameters|
|Fan Power for Cooling Tower||Cooling Pump
|Unit size (L*W*H mm)||Unit N.W.
|♦ Compressor Brand: Bitzer / Hanbell; Refrigerant: R22/R404A;
♦ Power Supply: Voltage 380V/3P/50Hz (For non-standard voltage, unit configuration needs to be calculated separately).
♦ Operating Conditions: T(water supply) : 20 ° C, T(ambient) : 32 ° C, T(condensing) : 38 ° C,T(evaporating):-20℃.
♦ (Note: The actual ice production varies due to the influence of water supply temperature and ambient temperature.)
♦ (The final interpretation of the above metioned parameters is in Icesource, there will be no further notice, if there is any technical change.)